![]() ![]() Install the spring between the bottom of the fuel filter and the sediment bowl Take fuel sediment bowl off by rotating the retaining nutĬheck the two O rings for any damage and replace them as needed Open fuel shutoff valve and allow it to flow until only fuel is flowing from the filter base, no waterĭrain fuel filter after every 100 hours of use If operating under sever conditions change every 70 hours after the first changeĬlose fuel shutoff valve (so that the handle is pointing towards the “C”) Ensure that oil does not leak through the seal of the filter, then refill oil as needed.Ĭhange oil and filter after first 50 hours and every 100 subsequent hours under normal conditions. When a new filter is installed, engine oil typically decreases a little. Tighten filter an additional ¾ turn by hand ![]() Tighten filter until it touches the mounting surface Remove old oil filter (be careful as oil will drain from filter)Īpply a small amount of engine oil to the rubber seal of the new filter While engine is still somewhat warm take out drain plug and drain oil Concepts apply to all TC-Series machines.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |